Dell OptiPlex 7090 Micro Form Factor Service Manual page 50

Table 5. System setup options—Integrated Devices menu (continued)
Integrated Devices
Table 6. System setup options—Storage menu
Storage
SATA Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
SATA-0
Type
Device
SATA-1
Type
Device
SATA-2
Type
Device
SATA-3
Type
Device
M.2 PCIe SSD-0
Type
Device
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enable or disable the SD card read-only mode.
Table 7. System setup options—Display menu
Display
Multi-Display
Enable Multi-Display
50 System setup
By default, the Disabled option is enabled.
Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, the AHCIoption is enabled.
Enable or disable the onboard drives.
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the SATA HDD type information of the computer.
Displays the SATA HDD device information of the computer.
Displays the M.2 PCIe SSD-0 type information of the computer.
Displays the M.2 PCIe SSD-0 device information of the computer.
Enable or disable the SD card.
By default, the Secure Digital (SD) Card option is enabled.
By default, the Secure Digital (SD) Card Read-Only Mode option is not
enabled.
Enable or disable the Enable Multi-Display buttons on the computer.