Dell OptiPlex 7090 Micro Form Factor Service Manual page 49

Table 3. System setup options—System information menu (continued)
Overview
Slot 2
Slot 3
Slot 4
Table 4. System setup options—Boot Configuration menu
Boot Configuration
Boot Sequence
Boot Mode: UEFI only
Boot Sequence
Secure Digital (SD) Card Boot
Secure Boot
Enable Secure Boot
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Custom Mode Key Management
Table 5. System setup options—Integrated Devices menu
Integrated Devices
Date/Time
Audio
Enable Audio
Serial Port
Serial Port Configuration
USB Configuration
Front USB Configuration
Rear USB Configuration
Dust Filter Maintenance
Displays the SATA hard drive information of the computer.
Displays the SATA hard drive information of the computer.
Displays the SATA hard drive information of the computer.
Displays the boot mode.
Displays the boot sequence.
Enable or disable the SD card read-only boot.
By default, the Secure Digital (SD) Card Boot option is not enabled.
Enable or disable the secure boot feature.
By default, the option is not enabled.
Enable or disable to change the secure boot mode options.
By default, the Deployed Mode is enabled.
Enable or disable custom mode.
By default, the custom mode option is not enabled.
Select the custom values for expert key management.
Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Enable or disable the integrated audio controller.
By default, all the options are enabled.
Enable or disable the serial port address.
By default, the COM1: Port is configured at 3F8h with IRQ4 option is
enabled.
● Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Enable or disable the individual front USB ports.
By default, all the options are enabled.
Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Enable or disable the dust filter maintenance.
System setup 49