System Board; Removing The System Board - Dell OptiPlex 7090 Micro Form Factor Service Manual

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the graphics card
4. Remove the solid-state
5. Remove the WLAN card.
6. Remove the fan assembly.
7. Remove the memory module.
8. Remove the speaker.
9. Remove the processor.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
Discrete system board
1. M.2 WLAN connector
2. M.2 SSD PCIe connector
3. Coin-cell battery
4. M.2 SSD PCIe connector
5. Riser card connector
6. Processor socket
7. Memory slots
8. Intrusion switch
35 W system board
before working inside your
drive.
computer.
Removing and installing components 35