Fan Assembly; Removing The Fan Assembly-Discrete Configuration - Dell OptiPlex 7090 Micro Form Factor Service Manual

2. Place the WLAN card bracket to secure the antenna cables.
3. Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the
system board.
4. Replace the (M2x3.5) screw to secure the WLAN card bracket to the WLAN card.
5. Align and place the WWAN-card shielding cover, press to fit it firmly to cover the WWAN card.
Next steps
1. Install the graphics card.
2. Install the side cover.
3. Follow the procedure in

Fan assembly

Removing the fan assembly-Discrete configuration

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the graphics card
About this task
The following images indicate the location of the fan assembly and provide a visual representation of the removal procedure.
24 Removing and installing components
after working inside your
before working inside your
computer.
computer.