INVENTOR K2VI32-09WFI User Manual page 8

Operation
TEMPERATURE and FAN SPEED Setting
1
Unit will start running to reach the
PURIFY FAN MODE
temp. setting on LCD.
ECO SENSOR
2
AN Operation
changes as follows:
Unit will run at selected fan speed.
6
button.
pressed, temp. setting
increases 0.5 ºC.
pressed, temp. setting
decreases 0.5 ºC.
ECO SENSOR Operation
PURIFY
ECO SENSOR
1
ECO SENSOR Operation
Press ECO SENSOR button,For each press,changes
as follows:
NOTE :
A human sensor is used to detect changes in the infrared radiationemitted by
human bodies. In case of the following conditions, the detection may not be
accurate:
temperature
The speed of human movement exceeds the sensitivity of the sensor.
objects due to the wind.
Moving targets go beyond the detection range of the sensor.
sharply.
Besides, if a person is at the border of two or three air blowing areas, the
automatically.
6
ECO SENSOR
FAN MODE
cancel