INVENTOR K2VI32-09WFI User Manual page 7

Operation Operation
PURIFY Operation
Press the PURIFY button on
the remote control.
PURIFY FAN MODE
ECO SENSOR
1. While the air conditioner is operating in the purifying mode, if your press down the
will be cancelled and the dust removal filter will slide back its original position.
1. Users can set whether to turn on the automatic purifying mode through the APP.
2. When the purifying function is turned on, due to the sliding of the dust removal filter, slight noise may be generated and this is
a normal phenomenon.
3. If the air quality indicator light still shows red after the purifying has been operated for a long time period, we recommend you
to replace and clean the dust removal filter.
4. In the purifying mode, low fan speed operation will affect the purifying effects.
5. You cannot enter the purifying mode from the self-cleaning mode directly.
6. The purifying module of this product has transmission mechanism, so please do not switch on and off the purifying function
frequently.
PURIFY
Exit method:
Matters needing attention:
Purifying Function:
IFD filter:
In the cooling/heating/fan mode, if you press down the
PURIFY button of the remote controller, the dust
removal filter will slide to the working position within
three minutes and start purifying.
In the smart operation mode, the product will determine
whether the purifying function needs to be turned on or
not automatically according to the PM2.5 concentration
value actually detected by the indoor air quality sensor.
If yes, then the purifying function will turn on
automatically. When the PM2.5 concentration drops to a
certain value, the purifying function will turn
automatically and you do not need to press the remote
controller.
PURIFY button, then the purifying function
5
off
5