INVENTOR K2VI32-09WFI User Manual page 10

Operation
SWING Operation
1
For each press of "
displays as follows according to
different operation modes:
COOL/DRY:
HEAT:
SMART
HUMIDITY
AIR
STATUS
SMART:
Initial state
2
For each press of "
displays as follows:
remote controller:
Initial state
When humidity is high, condensate water might occur
at air outlet if all vertical louvers are adjusted to left or
right.
position for a long time in COOL or DRY mode,
otherwise, condensate water might occur.
better air circulation
8
" button, air
" button, remote controller
TIMER Operation
Set Clock correctly before starting Timer operation. You can
let unit start or stop automatically a following times: Before
you wake up in the morning, or get back from outside or
after you fall asleep at night.
1
1
TIMER
SMART
HUMIDITY
AIR
STATUS
1 min, if kept depressed, it will increase rapidly. It can be
adjusted within 24 hours.
3
ON OFF
" " or " "
To cancel TIMER mode.
TIMER
Just press
display disappear.
8
Select your desired operation
mode.
Select your desired
TIMER ON.
TIMER ON
Remote controller: "
Select your desired
TIMER OFF.
TIMER OFF
Remote controller: "
2
Time setting.
Every time the button is pressed,
time setting increases or decreases
APPLY
button several times until TIMER
"
"