INVENTOR K2VI32-09WFI User Manual page 12

Operation
SMART Operation
(This function is unavailable on
some models)
One key can give you a
comfortable room!
The air conditioning unit can
judge the indoor temperature and
humidity, and make the adjustment
accordingly.
SMART
HUMIDITY
Press ON/OFF button, unit starts.
AIR
STATUS
Press SMART button "
displayed on the remote controller.
SMART FRESH
SMART Defrost
SMART FAN SPEED
SMART FAN HEALTH
SMART DRY
SMART SOFT
SMART Control temperature
or SMART stops
Under the cooling, heating and dehumidifying mode,
press the smart key to enter the smart function. Under
the smart running mode, when the air conditioning is
running, it will automatically select cooling, heating,
dehumidifying or blowing mode as When the smart
function is running, press the "cooling" "heating" or
"dehumidifying" key to switch to the other mode, you
will exit from the smart function.
10
SMART start
SMART
" is
AIR STATUS and
SMART
HUMIDITY
AIR
STATUS
If you press the button of query, the LCD display will show
the temperature of the indoor environment.
If you press the button twice continuously, the LCD display
will show the humidity value of the indoor air;
If you press the button three times continuously, the LCD
display will show the PM2.5 concentration of the indoor air.
Note: Time intervals of continuous button pressing shall be
less than 5s.
Loading of the battery
1
Remove the battery cover;
2
Load the batteries as illustrated. 2 R-03 batteries,
resetting key (cylinder); Be sure that the loading is
in line with the "+"/"-";
3
Load the battery, then put on the cover again.
10
SMART HUMIDITY
Press SMART HUMIDITY
SMART
HUMIDITY
button
In the mode, the
SMART Humidity
thermoregulation range is 16°C-30°C.
When the fan speed is displayed as
automatic (default initial state), it is
smart humidity mode and the air conditioner
regulates automatically and controls the
relative humidity of the indoor environment
within 40%-55%. If you manually adjust the
fan speed to high/medium/low position,
then the AC enters ordinary drying.
If the fan speed is set to automatic,then
the machine enters smart humidity mode again.
AIR STATUS function
AIR STATUS
Operation