INVENTOR K2VI32-09WFI User Manual page 5

Operation
23
22
SMART
21
HUMIDITY
AIR
20
STATUS
19
18
Note:
The distance between the signal transmission head and
the receiver hole should be within 7m without any obstacle
change-over wireless telephone is installed in the type
in receiving the signals, so the distance to the indoor unit
should be shorter.
Full display or unclear display during operation indicates the
batteries have been used up. Please change batteries.
If the remote controller can't run normally during operation,
please remove the batteries and reload several minutes later
Hint:
Remove the batteries in case unit won't be in usage for
a long period.
18. TIMER button
19. CLOCK button
10 ºC button
20.
special heating set
function: 10 degree
heating maintaining
21. SMART HUMIDITY button
22. SMART button
Used to set SMART
operation.
23. SWING up/down button
24. SWING left/right button
25. SLEEP button
26. HEALTH AIRFLOW button
27. AIR STATUS button
28. CODE button
24
A-b yard
25
29. APPLY button
26
30. LIGHT button
27
Control the lightening and
extinguishing of the indoor
28
LED display board.
29
30
Clock and Lock set
SMART
HUMIDITY
AIR
STATUS
Press " SMART HUMIDITY" +"HEALTH AIRFLOW"
simultaneously can
function (
3
1
Press CLOCK button,
2
Press "+" or "-" to set
correct time.
Each press will increase or
decrease 1min. If the button is
kept pressed, time will change
quickly.
3
press APPLY, "AM" and
starts working.
set and cancel the "LOCK"
)
3