Table of Contents
Advertisement
table a: rEcOMMEnDED MiniMuM WirE GauGE
FOr EXtEnSiOn cOrDS (120 VOLt)
naMEpLatE
aMpErES
(at full load)
0 – 6
6.1 – 10
10.1 – 12
12.1 – 16
7. USE PROPER EXTENSION CORD.
Make sure your extension cord is in good
condition. When using an extension cord, be
sure to use one heavy enough to carry the
current your product will draw. An undersized
cord will cause a drop in line voltage resulting in
loss of power and overheating. Table A shows
the correct size to use depending on cord
length and nameplate ampere rating.
If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
8. Make sure that the Switch is in its off position.
Plug the Power Cord into the power outlet.
9. Hold the loose Hose end securely.
Turn the switch on to operate the Vacuum.
Page 6
EXtEnSiOn cOrD
LEnGtH
25'
50'
100'
150'
18
16
16
14
18
16
14
12
16
16
14
12
14
12
Do not use.
For technical questions, please call 1-888-866-5797.
10. WHEn WEt VacuuMinG:
iMpOrtant! Leave a gap at the tip of
the nozzle opening to allow air inflow.
Do not immerse the nozzle completely in liquid.
When the Motor sound becomes
higher in pitch, the tank is full and
the float is closing off the motor intake.
iMMEDiatELy:
a. Dry yOur HanDS anD FEEt
b. turn the Vacuum off
c. unplug the Power Cord
d. empty the Tank.
WarninG! tO prEVEnt SEriOuS inJury
FrOM ELEctric SHOcK:
Dry your hands and feet before touching
plug or switch.
Do not continue to use the vacuum
when the tank is full of liquid.
11. To prevent accidents,
Dry yOur HanDS anD FEEt,
turn off the appliance and unplug it after use.
Empty and clean Tank, dry Tank,
clean Filter (see cleaning Filters on page 8),
then store the appliance indoors
out of children's reach.
Item 64753
Hide quick links:
Advertisement
Table of Contents
