INTERFACE
Display Shows
SELECT
AUTO IF TIME
INPUT BUFFER
PARALLEL
USB 2.0
RESET MENU
Display Shows
RESET PRINTER
FACTORY RESET
Description
=AUTO/PARALLEL/USB/NETWORK
= 1, 2, 3 ... 99 (sec)
You need to set the time-out period for the auto interface selection.
= Level1, 2, 3 ... 15
Increases or decreases the
input buffer capacity.
When using the parallel interface
Sub-setting Menu
HIGH SPEED
BI-DIR
INPUT PRIME
HIGH SPEED
Description
Resets the printer and restores all printer settings (including command settings) to
settings you have previously made with the control panel buttons.
Resets the printer and restores all printer settings (including command settings) to
the factory settings. See List of factory settings on page 3-24.
RESTART PRINTER?
Description
=ON/OFF
Turns high-speed parallel communications ON or
OFF.
=ON/OFF
Turns bi-directional parallel communications ON
or OFF.
=ON/OFF
Turns prime signal ON or OFF.
=ON/OFF
Turns High-Speed USB 2.0 communications ON
or OFF.
CONTROL PANEL 3 - 21