Optional Fonts Package; Selecting The Optional Fonts - Brother HL-6050 User Manual

Optional fonts package

Optional fonts package (BS-3000)
The optional font package (BS-3000) is the CD-ROM you need for installing the 136 PostScript
and TrueType Fonts.
Optional barcode fonts package
(BT-1000)
The optional Barcode fonts package (BT-1000) is the CD-ROM you need for installing the Barcode fonts.

Selecting the optional fonts

After you have installed the optional fonts, you can select optional fonts using any of the following
methods:
1
Through your application software
2
With a font selection command
3
With the control panel menu settings.
When you select fonts through your application software, follow the instructions specific to your software.
See your software manual if you need assistance. When you select fonts with a font selection command,
embed the font selection command in your program. See the Technical Reference Guide. Please call a
Brother authorized service representative or Brother Customer Service for references to the Technical
Reference Guide.
When you select the fonts through your software or with a command, note the following:
You do not need to be concerned about the font control panel setting. The software or command
overrides the printer setting.
Be sure to install a fonts package that has the fonts you want. The printer automatically selects
the font that has exactly the same or similar characteristics as those you have set through the
software or with a command. If the installed fonts package does not happen to have a font of
similar characteristics, the printer will print in an unexpected font.
To select fonts with the control panel setting menu, follow these basic steps:
1
Menu
Press any of the
2
+ -
Press or until INFORMATION appears on the LCD display.
3
Set
Press to proceed to the next menu level, and then press
4
Set
Press to print the list of optional fonts.
5
Find the font number on the list.
6
+ -
Press or on the control panel to select PRINT MENU.
7
Set
Press to proceed to the next menu level, and then press
FX-850, or IBM PROPRINTER.
8
Set
Press the button to select the emulation for the fonts you want to select HP LASERJET, EPSON
FX-850, or IBM PROPRINTER.
9
+ -
Press or button to select FONT NO, and then select the font number of the font you want.
4 - 15 OPTIONS
+ - Set Back
buttons ( , , or ) to take the printer off line.
+ -
or until PRINT FONTS appears.
+ -
or to select HP LASERJET, EPSON
® ™
3 Agfa