Set Ip Address - Brother HL-6050 User Manual

Set IP Address

INFORMATION
NETWORK
TCP/IP
TCP/IP ENABLE
IP ADDRESS=
192.0.0.192*
123.0.0.192*
123.45.67.89
123.45.67.89*
3 - 22 CONTROL PANEL
Press the + or - button until NETWORK appears (and to display each setting
shown below).
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
The last digit in the first part of the number is blinking.
Press the + or - button to increase or decrease the number.
Press the Set button to go to the next number.
Repeat this process until you have set your IP address.
Press the Set button to complete the IP address.
An asterisk appears at the end of the display.