Buttons; Go Button; Job Cancel Button - Brother HL-6050 User Manual

Buttons

You can control the basic printer operations and change various printer settings with seven buttons (Go,
Job Cancel, Reprint, +, -, Back, Set).
Button
Go
Job Cancel
Reprint
+
-
Back
Set

Go button

You can change the panel indications from the current status (Menu, Error and Reprint settings) by
pressing the Go button once. For ERROR indications, the control panel only changes when the error is
cleared.
You can pause printing with the Go button. Pressing the Go button again restarts the print job and clears
the pause. During a pause, the printer is off line.
If the printer is in PAUSE mode and you do not want to print the data that is left, you can cancel the
job by pressing the Job Cancel button. Once the job has been cancelled the printer will return to
the READY state.

Job Cancel button

You can cancel the processing or printing of data with the Job Cancel button. The display shows JOB
CANCELLING until the job is cancelled. After cancelling the job, the printer returns to the READY state.
When the printer is not receiving data or printing, the display shows No Data!!! and you cannot cancel
the job.
3 - 2 CONTROL PANEL
Operations
Exit from the control panel menu, reprint settings and error messages.
pause and continue printing.
Stop and cancel the printing job in progress.
Select the number of extra copies (1-999).
Move forward through menus.
Move forward through the available options.
Move backward through menus.
Move backward through the available options.
Go back one level in the menu.
Select the control panel menu.
Set the selected menus and settings.