Silvercrest SEMM 1470 A2 Operating Instructions Manual page 43

Do not allow any liquid to run over the appliance's plug
►
connections.
Never touch the appliance with wet or moist hands.
►
To avoid potential risks, if the appliance power cable is
►
damaged, it must be replaced by the manufacturer, its customer
service or by a qualified technician.
Risk of burns! Some parts can become very hot during use!
►
Hot steam is produced while using the appliance. Ensure that you
►
do not scald yourself. Keep a safe distance away from the steam.
The appliance should only be connected to correctly installed
►
and earthed mains power sockets.
Clean the appliance and, in particular, the parts that come into
►
contact with food regularly as described in the section "Cleaning
and care".
After use, the surfaces of the heating elements will still have some
►
residual heat.
Use the appliance only for its intended purpose. Risk of injury if
►
appliance is used incorrectly.
CAUTION! PROPERTY DAMAGE!
Defective components must always be replaced with original
►
replacement parts. Compliance with safety requirements can only
be guaranteed if original replacement parts are used.
Protect the appliance from penetration by moisture and liquids.
►
Protect the appliance against knocks, dust, chemicals, extremes of
►
temperature, etc. and keep it away from sources of heat (ovens,
radiators).
│ GB │ MT
■ 40 SEMM 1470 A2