Samsung AC018KN4DCH Service Manual page 47

▶ AR-KH00E remote control (for 360 cassette only)
Entering the
mode for setting
the options
Temperature button
Timer button
NOTE
There mote control display may vary depending on the model.
1. Enter the mode for setting the options:
a. Remove the batteries from the remote control.
b. While holding down the
c. Make sure that you are entered to the mode for setting the options:
The total number of available options are 24: SEG1 to SEG24.
Because SEG1, SEG7, SEG13, and SEG19 are the page options used by the previous remote control models,
CAUTION
the modes to set values for these options are skipped automatically.
Set a 2-digit value for each option pair in the following order: SEG2 and SEG3
SEG6 and SEG8
SEG20
SEG1 SEG2 SEG3
SEG13 SEG14 SEG15S
(Temp) and (Timer) buttons simultaneously, insert the batteries into the remote control.
SEG9 and SEG10
SEG21 and SEG22 SEG23 and SEG24.
SEG4 SEG5 SEG6 SEG7
EG16 SEG17 SEG18 SEG19
SEG11 andSEG12 SEG14 and SEG15
SEG8 SEG9 SEG10S
SEG20 SEG21 SEG22
4-7
Setting the
option values
Mode button
Wheel
SEG4 and SEG5
SEG16 and SEG17
EG11 SEG12
SEG23 SEG24
Troubleshooting
SEG18 and