Motorola IMPRES NNTN7063 User Manual page 7

09L67_IMPRES_MUC.book Page 5 Tuesday, December 29, 2015 11:43 AM
Once the IMPRES battery is properly seated into the pocket, the
charger indicator illuminates, indicating the charger has recognized the
presence of the battery. Refer to the charging indicators in Table 1.
Table 1. IMPRES Battery Charging Indicators
Charge Indicator
Single Green Blink
Steady Red
Blinking Green
Steady Green
Blinking Orange
Blinking Red
Steady Orange
Blinking Red/Green
Description
Charger has successfully powered up.
Charger is in rapid charge mode.
Charger has completed rapid charge (>90% available
capacity). Charger is in trickle mode.
Charger has completed charging and battery is fully
charged.
Battery is recognized by charger but is waiting to
charge. (Either the battery voltage is too low or the
battery temperature is too low or too high to allow
charging. When this condition is corrected, the battery
will automatically begin charging.)
Battery is unchargeable or not making proper contact.
(This feature applies to IMPRES batteries only)
Battery is in recondition or initialization mode. The
length of time the charger remains in this mode
depends upon the state of charge remaining in the
battery when inserted. (Fully charged batteries
require more time to recondition – 8 to 12 hours or
more – than fully discharged batteries.)
(This feature applies to IMPRES batteries only)
Battery has completed charging and is fully charged.
Battery continues to be usable, but may be nearing
the end of its rated service life.
5