Table of Contents
Advertisement
2
Barracuda 4FC Installation Guide, Rev. A
•
Ground yourself to the drive whenever the drive elec-
tronics are or will be exposed. Connect yourself to
ground with a wrist strap (Seagate part number
12263496). Connection may be made to any
grounded metal assembly. As a general rule, remem-
ber that you and the drive electronics must all be
grounded to avoid potentially damaging static dis-
charges.
•
Do not remove any circuit boards from the drive.
•
Never use an ohmmeter on any circuit boards.
•
When installing the drive on a carrier or tray, dis-
charge the static electricity from the carrier or tray
prior to inserting it into the system.
Important safety information and precautions
Caution. Use forced-air ventilation when bench-testing
the drive to ensure proper cooling of drive
components.
Use proper safety and repair techniques for safe, reliable
operation of this unit. Service should be done only by
qualified persons. We recommend the procedures in this
manual as effective ways of servicing the unit. Some pro-
cedures require the use of special tools. For proper main-
tenance and safety, you must use these tools as
recommended.
The procedures in this manual and labels on the unit con-
tain warnings and cautions that must be carefully read
Advertisement
Table of Contents
