Disposal Information; Conformity; Exemption From Liability - Flex RFE 40 18.0-EC Original Operating Instructions

Disposal information

WARNING!
End-of-life power tools must be rendered
inoperable before disposal.
– For mains-operated power tools, remove
the mains cable.
– For battery-operated power tools, remove
the battery.
EU countries only
Do not dispose of electric power
tools in household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and its incorporation
into national law, used electric power tools
must be collected separately and recycled
in an environmentally-friendly manner.
Recycling raw materials instead of
waste disposal.
Device, accessories and packaging should
be recycled in an environmentally-friendly
manner.
Plastic parts are identified for recycling
according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open end-of-life
batteries.
EU countries only: defective or end-of-life
batteries must be recycled in accordance
with Directive 2006/66/EC.
NOTE
Please ask your dealer about disposal
options.
18

conformity

We declare on our sole responsibility that the
product described under "Technical data"
conforms to the following standards or
normative documents:
EN 62841 according to the provisions of
directives 2014/30/EU, 2006/42/EC,
2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Peter Lameli
Technical Head
15.12.2020
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Exemption from liability

The manufacturer and his agent are not liable
for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product.
The manufacturer and his agent are not liable
for any damage which was caused by improper
use of the power tool or by use of the power
tool with products from other manufacturers.
RFE 40 18.0-EC
Klaus Peter Weinper
Head of Quality
Department (QD)