Symbols Used In This Manual; Symbols On The Power Tool; Important Safety Information - Flex RFE 40 18.0-EC Original Operating Instructions

RFE 40 18.0-EC
Contents
Symbols used in this manual . . . . . . . . 11
Symbols on the power tool. . . . . . . . . . . 11
Important safety information. . . . . . . . . . 11
Noise and vibration . . . . . . . . . . . . . . . . 12
Technical data . . . . . . . . . . . . . . . . . . . . 13
Overview . . . . . . . . . . . . . . . . . . . . . . . . 14
Instructions for use. . . . . . . . . . . . . . . . . 15
Maintenance and care . . . . . . . . . . . . . . 17
Disposal information . . . . . . . . . . . . . . . 18
conformity . . . . . . . . . . . . . . . . . . . . . 18
Exemption from liability . . . . . . . . . . . . . 18

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation.
Non-observance of this warning may result in
injury or damage to property.
NOTE
Denotes hints on use and important
information.

Symbols on the power tool

Read the operating instructions to
mitigate the risk of injury.
Wear protective goggles.
Wear ear defenders.
Disposal information for the old
tool (see page 18).

Important safety information

WARNING!
Before using the power tool, please read the
following and act accordingly:
- these operating instructions,
- the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet no.: 315.915),
- the currently valid site rules and the
regulations for the prevention of accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may pose a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only
- for its intended use,
- in perfect working order.
Faults which compromise safety must be
repaired immediately.
Intended use
The gutter bracket groove chaser
RFE 40 18.0-EC is designed
- for commercial use in industry and trade,
- for chasing wood,
- for chasing mounting grooves for gutter
brackets.
Safety instructions
WARNING!
Read all safety notices and instructions.
Failure to comply with the safety notices and
instructions may result in electric shock, fire
and/or serious injuries. Keep all safety
notices and instructions in a safe place for
future reference.
 Wait until the blade shaft has come to rest
before placing the power tool down. An
exposed blade shaft could cut into the
surface and cause loss of control as well as
severe injuries.
11