Table of Contents
Advertisement
Available languages
Available languages
GM 270
Symbols used in this manual
WARNING!
Denotes impending danger. Non-observance of this warning
may result in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation. Non-observance of
this warning may result in slight injury or damage to property.
NOTE
Denotes application tips and important information.
Symbols on the power tool
Before switching on the power tool, read the
operating manual!
Technical specifications
Machine type
Dimension (H x L x W)
Weight (basic structure)
Weight (telescopic rod)
Maximum working height
For your safety
WARNING!
Before using the giraffemobile, please read and follow:
–
these operating instructions,
–
the currently valid site rules and the regulations for the
prevention of accidents.
This giraffemobile is state of the art and has been constructed
in accordance with the acknowledged safety regulations.
Nevertheless, when in use, the power tool may be a danger to
life and limb of the user or a third party, or the power tool or
other property may be damaged. The giraffemobile is only to be
used
–
as intended,
–
in perfect working order.
Faults which impair safety must be repaired immediately.
Intended use
This giraffemobile GM 270 is designed
–
for commercial use in industry and trade,
–
as a tripod for FLEX long-necked sanders which are
designed for sanding walls and ceilings,
–
to be used particularly for sanding high ceilings,
–
to be used exclusively with long-necked sanders which are
specified in these instructions.
GM 270
mm
1400 x 660 x 400
kg
4.9
kg
1.9
m
2.7
Long-necked sanders which can be used with the giraffemobile
GM 270:
–
GE 5/GE 5 R
–
GE 6 (only with additional insert)
–
GE 7
Extractors which can be used:
–
VCE 33 L MC and S44 L AC (only with holder L-BOXX,
VCE-AP, 445.169)
–
VCE 33 L AC/M AC
–
VCE 44 L AC/M AC/ H AC
CAUTION!
Use only the electric power tools listed here. Otherwise, there
is a risk of damaging the device or the giraffemobile.
–
Read the operating instructions for the connected devices!
Safety instructions
WARNING!
Read all safety instructions and other instructions. Failure
to observe the safety instructions and other instructions may
result in an electric shock, fire and/or serious injuries. Keep all
safety instructions and other instructions in a safe place
for the future.
Pull the plug out of the socket and/or remove the bat-
tery before making any adjustments to the device or
changing accessories. Some accidents are caused by
electric power tools starting unintentionally.
Before mounting the electric power tool, assemble the
supporting device correctly. Correct assembly is import-
ant to prevent the risk of collapse.
Before using the electric power tool, attach it securely
to the supporting device. There may be a loss of control if
the electric power tool slips on the supporting device.
Place the supporting device on a solid, flat and level
surface. If the supporting device can slip or wobble, the
electric power tool cannot be guided evenly or safely.
Do not overload the supporting device or use it as a
ladder or trestle. Overloading or standing on the suppor-
ting device may cause the centre of gravity of the suppor-
ting device to shift upwards and overturn it.
Overview (Figure A)
1
Telescopic rod
2
Hose retainer
3
Union nut
4
Gas strut
5
Clamp lever
6
Giraffe holder
7
Base plate
8
Positioning aid
9
Pipe clamp
10
Telescope support
11
Clamp lever
12
Pipe connector
13
Handle
14
Securing bolts
7
Advertisement
Table of Contents
