Bushnell Neo+ User Manual page 18

Options Menu
2.
3.
4.
5.
18
(Map Course)
If you need to edit or create the course name,
select COURSE NAME and press OK/SHOT.
Names should be different from any of your
other golf courses to avoid duplication or
confusion. If you're editing an existing course
and don't want to change the name, skip to
step 4.
UP/DOWN buttons, scroll to
Using the
highlight each character and press OK/
SHOT. To delete characters, scroll to "DELETE"
and press OK/SHOT. When finished, scroll to
highlight "SAVE" and press OK/SHOT.
Next, select MAP GPS POINTS and press
SHOT (Fig. 16). Select the hole (Fig. 17), then
the default name for the point (Fig. 18) and
press OK/SHOT.
If editing an existing point, select its name
from the list, then press OK/SHOT while
standing at the point to register its new
location. When creating a new custom point
select CSTM 1 (CSTM 2, etc) and press OK/
SHOT, You can then select ABBREVIATIONS
(Fig. 19) and pick from the list (CREEK, SAND,
HZRD, etc.), or give it your own USER DEFINED
name. Next, make sure you are standing at the
point, and press OK/SHOT to register it. You
can also just accept the default name (CSTM
1) and go directly to REGISTER POINT.
Options
Fig. 16
OK/
Fig. 17
Fig. 18
Fig. 19