Bushnell Neo+ Quick Start Manual

Get Accurate Distances in Minutes

1
The Bushnell Neo is preloaded with over 16,000 golf courses and ready to use out of the box without
+
downloading any additional software. Within 45 days of first use, you must go to iGolf.com to register
your Neo , which will update the preloaded course information (see reverse for details). Registration is
+
free and takes only a few minutes. Follow the instructions below to start using your Neo
it for 6 hours minimum, using the AC adapter and USB cable).
1. Hold down the Power button for approximately 2 seconds.
2. Move away from tall buildings and trees for an unobstructed
reception of GPS satellites. Wait for a GPS signal to be acquired
so that the course you are playing can be found automatically.
The initial GPS satellite signal lock can take up to 5 minutes. Select
'Play Golf' from the main menu.
3. Once the GPS signal has been acquired, a list of courses
near your location will be displayed. A manual search option is
available if a GPS signal has not been acquired.
4. Select the desired course.
5. The main GPS screen shows distances to the Front, Center and
Back of the green for each hole:
OK/SHOT button initiates the Shot Distance Calculator
4
UP and DOWN arrows switch between holes
4
SCREEN button displays custom points
4
ESC/MENU button opens the Play Menu
4
If you require further assistance, please review the support documents available online at www.bushnellgolf.com
Neo Quick Start Guide
+
POWERED
BY
(after charging
+
1 2 3 4 5
1. Power
2. SCREEN
3. Up/Down Arrows
4. OK/SHOT
5. ESC/MENU
Lit#: 98-1637 / 06-10