Play Golf Mode - Bushnell Neo+ User Manual

With PLAY GOLF highlighted, press OK. The display will
indicate that the unit is SEARCHING FOR LOCAL COURSES.
If it does not, and you see this message: "Not enough satellites
for local search. Press OK to start manual search.", press OK/SHOT
and follow the MANUAL SEARCH procedure described in the
next paragraph*. When the search is complete, a list of golf
courses in order of their distance from your current location is
displayed (Fig. 2). Select the course you want from the list and
press OK/SHOT.
A manual search option is also available. If no courses are
found, or the one you want to play is not listed (as GPS info
for new courses is added to the iGolf.com database, it will be
available via your user account), select MANUAL SEARCH and
press OK/SHOT, then enter the name of the state using the
UP/DOWN buttons (Fig. 3). Select DELETE and press OK/SHOT
if you make a mistake. If you get multiple results, select the
state from the list and press OK/SHOT, then enter the course
name (at least the first few letters) (Fig. 4). When finished,
select "SEARCH" and press OK/SHOT. You should then be able
to select the course from the search results (Fig. 5).
*If you are indoors, or don't have an unobstructed view of the
sky outdoors, you may see the "Not enough satellites..." message
when you enter the PLAY GOLF mode. You can press ESC/MENU
to return to the Main Menu, move to a better location and/or see
if the satellite signal indication improves, then press OK (with
PLAY GOLF selected) to try a local course search again.
Play Golf

Play Golf Mode

Fig. 2
Fig. 3
Fig. 4
Fig. 5
13