Download Print this page

Whirlpool ACM 6602 E/WH Manual page 37

Advertisement

Available languages

Available languages

USE OF YOUR PRODUCT
4- Set the finish time by pressing the mode button again until the display shows 'End' and the 'A'
symbol flashes.
5- Without delay after the previous step, press the + or - buttons to select the desired finish time.
6- After a few seconds the timer will show the time of day and the 'A' symbol will be displayed
confirming that the timer has been programmed.
7- Rotate both the oven function and the oven temperature controls to the desired settings.
8- The oven will start cooking at the required time and will switch off automatically at the selected
finish time.
9- When the oven switches off automatically, the audible warning signal will be heard. Pressing any of
the timer buttons will silence the timer and reset the oven to manual cooking mode.
Digital timer sound adjustment :
While the timer shows the time of day; press (-) button for a few seconds. The timer will give an
audible signal beep. After hearing this signal, each time the (-) button is pressed, timer will give a
different signal beep. There are 3 different signals.
Do not press any further buttons and timer will save the last selected signal type.
Accessories
• The product already supplied with accessories. You can also use accessories you purchase from
the market, but they must be heat and flame resistant. You can also use glass dishes, cake
molds, special oven trays that are appropriate for use in oven. Pay attention to the using
instructions by the manufacturer of those acessories.
• In case small size dishes are used, place the dish onto the wire grid, as it will completely be on
the middle part of the grid.
• If the food to be cooked does not cover the oven tray completely, if the food is taken from the
deep freezer or the tray is being used for collection of food's juices that flow during grilling, the
form changes can be observed in the tray because of the high heat that occur during cooking or
roasting. The tray will return to its old form only when the tray cool down after cooking. This is a
normal physical event that occurs during heat transfer.
• Do not leave glass tray or dish in cold environment right away after cooking in glass tray or dish.
Do not put onto cold and wet surfaces. Place on a dry kitchen cloth or dish cross, ensure it to
cool slowly. Otherwise the glass tray or dish may be broken.
• If you will grill in your oven; we recommend you to use the grid that was given in tray together
with product (If your product includes this material). If you will use the big wire grid; put a tray
onto one of the lower shelves for fat to be collected. Also put some water into it for ease of
cleaning.
• As explained in the corresponding clauses, never attempt to use the gas operated grill burner
without the grill protection lid. If your oven has a gas operated grill burner, but the grill heat
shield is missing, or if it is damaged and cannot be used, request a spare part from the nearest
service.
11

Advertisement

loading

This manual is also suitable for:

Acm 6602 e/ixAcm 6603 e/ix