Description Of Device; Summary Of Device Components; Function; Connection Lead - weinor BiLine Combio-868 LED Assembly And Installation Instructions Manual

BiLine Combio-868 LED
3

Description of device

3.1

Summary of device components

Fig. 1: Combio-868 LED remote-receiver
Item Connection
1 Mains
2 Light
3.2

Function

3.2.1

Connection lead

The LED remote-receiver can be fitted to the connection that has its own connector. The receiver
has connection leads for the light and mains supply. The remote-receiver is supplied pre-fitted to
the light bar and with all the cables ready-connected.
3.2.2

Connector pin assignment

The following connector pin assignment is used (see Fig. 1 for details):
•
2-pole AMP male connector, 230 V
•
2 flat plugs, 2.8x0.8, male/female: light LED
3.2.3

Scope of delivery

In the case of individual deliveries, the LED remote-receiver is delivered as follows:
•
Remote-receiver with connection leads for the light and mains supply
•
Operating instructions
Item number 116739-0000
Version 2 15.11.2013
Connector
AMP male connector, 2-
pole
2 flat plugs
We reserve the right to make technical
changes
Page 5/24
Assembly and installation instructions
Wire colour
Blue (N)
Black (L)
Red
Black