Table of Contents
Advertisement
e Troubleshooting Guide
PROBLEM
No image on the TV
Feedback noise
Music does not play
Images on TV look
grainy or lose colour
Images on TV
look dark
The lenses
do not rotate
No voice sound
Sound is distorted
from external
music source
Connecting to a TV or VCR and TV
24
CAUSE
TV or VCR is not set to
proper input
Batteries in Star Station
™
are weak or dead
Microphone is too close
to speakers
ROM inserted with main unit "ON"
ROM not fully inserted
Batteries in Star Station
™
are weak
Improper room lighting
Batteries in microphone are
weak or dead
Batteries in microphone are
weak or dead
Volume is set too loud on external
music source
White
Red
Yellow
Press the channel down button on the VCR or TV
and check for an INPUT channel below channel 2.
Use the menu system on your TV or VCR to find
INPUT or SOURCE. Change to INPUT
or SOURCE.
Consult your TV's or VCR's instruction manual.
Replace the batteries in Star Station
"C" (LR14) alkaline batteries.
Stand further away from your TV speakers.
Turn the volume down on your TV or
stereo system.
Turn Star Station
™
Make sure ROM is fully inserted into the
Star Station™.
Replace the batteries in Star Station
"C" (LR14) alkaline batteries.
Make sure the light source in the room is in front or
above your child. See page 15 for important hints
about room lighting
Replace the batteries in the microphone with three,
new "AAA" (LR03) alkaline batteries. Make sure the
power/volume switch on the microphone is set to off
O
when not in use.
Replace the batteries in the microphone with three,
new "AAA" (LR03) alkaline batteries.
Turn the volume down on your external music
source. Adjust the volume on your TV or
stereo system.
INPUT
TV
AUDIO IN
LEFT
RIGHT
OR
VIDEO IN
Note: Input jacks may be on the back of your TV or VCR.
SOLUTION
™
with six, new
off then on again.
™
with six, new
TV
VCR
Advertisement
Table of Contents
