Table of Contents
Advertisement
Troubleshooting Guide
PROBLEM
No image on the TV
Feedback noise
Music does not play
Images on TV look
grainy or lose color
Images on TV
look dark
Muted voice sound
Sound is distorted
from external
music source
10
CAUSE
TV or VCR is not set to
proper input
Batteries in Star Station
are weak or dead
Microphone is too close
to speakers
ROM inserted with main unit "ON" Turn the Star Station
ROM not fully inserted
Batteries in Star Station
are weak
Improper room lighting
Batteries in microphone are
weak or dead
Other wireless devices in your
home may cause temporary
interference.
Volume is set too loud on
external music source
Press the channel down button on the VCR
or TV and check for an INPUT channel below
channel 2.
Use the menu system on your TV or VCR to
find INPUT or SOURCE. Change to INPUT
or SOURCE.
Consult your TV's or VCR's instruction manual.
®
Replace the batteries in Star Station
four, new "AA" (LR6) alkaline batteries.
Stand further away from your TV speakers.
Turn the volume down on your TV or
stereo system.
Make sure ROM is fully inserted into the
Star Station
®
Replace the batteries in Star Station
four, new "AA" (LR6) alkaline batteries.
Make sure the light source in the room is
in front or above your child. See page 7 for
important hints about room lighting
Replace the batteries in the microphone with
three, new "AAA" (LR03) alkaline batteries.
When the microphone detects interference
from another device, it will attempt to locate
another free channel. Sound from the
microphone will be temporarily muted while
this occurs. This could take up to 30 seconds.
Turn the volume down on your external music
source. Adjust the volume on your TV or
stereo system.
SOLUTION
®
off then on again.
®
.
®
with
®
with
Advertisement
Table of Contents
