Advertisement
Troubleshooting Guide
Problem
No image on the TV
Low battery symbol
appears on TV screen
Image is stretched or distorted
on a wide screen TV
Note: Input jacks may be on the back of your TV, VCR or DVD player.
Note: Input jacks may be on the back of your TV, VCR or DVD player.
15
Cause
TV or VCR is not set to
proper input
Batteries in the mat are weak
or dead
Battery compartment door is loose
Plug-and-play cord is disconnected
Batteries in the mat are weak
Wide screen TV aspect ratio
set incorrectly
INPUT
AUDIO IN
White
VIDEO IN
Yellow
Yellow
Y
Yellow
Solution
Press the channel down button on
the VCR or TV and check for an
INPUT channel below channel 2.
Use the menu system on your TV
or VCR to fi nd INPUT or SOURCE.
Change to INPUT or SOURCE.
Refer to your TV's or VCR's
instruction manual.
Replace all batteries in the
mat with four, new "AA" (LR6)
alkaline batteries.
Fully tighten both screws in the
battery compartment door.
Make sure both ends of the plug-
and-play cords are fully connected
to the mat and your TV or VCR.
Replace the batteries in the
mat with four, new "AA" (LR6)
alkaline batteries.
For best picture, do not use a 16:9
aspect ratio (stretched) wide screen
setting. This product is designed
for a regular screen TV with a 4:3
aspect ratio (display setting). When
viewed on a wide screen TV, you
will see black bars on the sides of
the image. For more information on
changing the aspect ratio, refer to
your TV owner's manual.
TV
LEFT
OR
VCR
TV
Advertisement
