Bios Configuration Options; Introduction; Entering Setup - Maple Systems OMI6800B Series Operation Manual

Operations Manual: OMI6800B Series

BIOS CONFIGURATION OPTIONS

INTRODUCTION

The BIOS (Basic Input/Output System) installed in the ROM of your OMI6800B Series supports Intel®
processors. The BIOS provides critical low-level support for standard devices such as disk drives and
serial ports. The BIOS also provides a Setup utility program that allows the user to specify system
configuration and setting options.
Warning: Changing settings or configurations within the BIOS of your OMI6800B
can adversely impact the operation of your unit if incorrectly performed.
Maple Systems provides the below instructions solely for the operations specified, and
is not responsible for improper unit operation caused by changing settings or entries
other than those explicitly listed below.

ENTERING SETUP

When the system is powered on, the BIOS will enter the Power-On Self Test (POST) routines
and the following message will appear on the screen:
Example of initial POST screen. Your POST screen may appear different.
Press the <Delete> key immediately during the POST portion of your PC's bootup sequence to enter the
BIOS. The Main Menu containing the system summary information will appear.
Operations Manual: OMI6800B Series
20
20