Table of Contents
Advertisement
OPERATION
DO NOT place heavy components on one extreme corner or edge of the Tear Down Table. This can cause the balance to shift
suddenly, tipping the Tear Down Table which can quickly cause severe injury!
• The two Locking Swivel Casters can be locked by pressing down on the Brake Lever. This will prevent the Tear Down Table from moving. To release brake
feature, lift-up on Brake Lever.
Store the Tear Down Table on a flat, level surface only to prevent possible unattended rolling and property damage.
MAINTENANCE
• Always remove and empty the Fluid Basin to avoid hazardous material spills.
• Periodically clean Fluid Basin and Drain Work Top of accumulated grease, fluids or other debris.
• The Tear Down Table is finished in rugged powdercoating which will provide many years of effort free beauty however it is advisable to keep the finish
clean and free from excessive dust and dirt.
• Keep the Tear Down Table in a clean and dry environment. DO NOT store it in or expose it to a damp or wet environment.
• Occasionally inspect all components for potential damage and proper alignment. Check all hardware for tightness
• DO NOT use if damage is discovered.
6
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Advertisement
Table of Contents
