Page 2
The EASTWOOD CUT-N-WELD WELDING TOP AND PLASMA CUTTING TOPS are available separately and designed to fit the Eastwood 750 lb. Work Stand (#43120) and others with up to a 1.25” [32mm] tube diameter. The Welding Top is constructed of heavy 14 gauge steel for superior warp-resistance and has generous 1.00”...
Page 3
• Once both screws have started threading, they should then be tightened. • Repeat for remaining screw and spacer. • The Eastwood Welding Top and/or Plasma Cutting Top is now ready for use. TECH TIP: Mark the appropriate chain link before folding the stand for storage so that the 23”...
Page 4
#20162 6pc Clamp Kit If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available online >> eastwood.com/21273manual The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA US and Canada: 800.343.9353...