Table of Contents
Advertisement
• Slip the four M12 Lock washers over the threaded Caster studs (FIG 5).
• Casters [D] & [E] may be added to the Side Frame Assemblies at this
time. Thread two Locking Swivel Casters [D] to the same side legs and
tighten with a 19mm wrench (FIG 6).
• Thread two Swivel Casters [E] to the opposite pair of Legs and tighten
with a 19mm wrench (FIG 6).
• Carefully raise and rotate the Tear Down Table so that it may be set
down on the Casters.
• Slide the plastic Fluid Basin [G] into the Guides under the Drain located
at the center of the Drain Work Top [A] (FIG 7).
• Your Eastwood Tear Down Table is now ready for use.
To order parts and supplies: 800.345.1178 >> eastwood.com
FIG. 5
FIG. 6
FIG. 7
5
Advertisement
Table of Contents
