The EASTWOOD TEAR DOWN TABLE features a spacious, powder coated, steel work surface with integral drain and a solvent-resistant polyethylene Fluid Containment Basin. The heavy, all steel support structure and 4” swivel casters support up to a total loaded weight of 250 lbs. [113kg.] yet is completely portable for rolling to the job and between project storage.
- DO NOT use the top of the Tear Down Table as a storage surface. PINCH HAZARD! • This Tear Down Table has moveable components that can crush and pinch. Keep fingers and hands away from pinch points when operating. To order parts and supplies: 800.345.1178 >> eastwood.com...
Page 4
ASSEMBLY FIG. 1 """" The Eastwood Tear Down Table consists of cumbersome metal components. Avoid pinching hands while han- dling parts during assembly. Obtaining the assistance of a helper during assembly is recommended. • Begin by placing the Drain Work Top [A] upside down on a soft surface.
Page 5
• Slide the plastic Fluid Basin [G] into the Guides under the Drain located at the center of the Drain Work Top [A] (FIG 7). • Your Eastwood Tear Down Table is now ready for use. FIG. 6 FIG. 7...
• Keep the Tear Down Table in a clean and dry environment. DO NOT store it in or expose it to a damp or wet environment. • Occasionally inspect all components for potential damage and proper alignment. Check all hardware for tightness • DO NOT use if damage is discovered. Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com...
Page 7
NOTES To order parts and supplies: 800.345.1178 >> eastwood.com...