B) Sound-To-Light Mode; C) Automatic Mode; D) Pre-Programmed Colour Setting; E) Fade Effects - Renkforce GM-313 Operating Instructions Manual

b) Sound-to-light mode

• Use the button MENU to select the setting ShNd.
• Push the ENTER button.
• Select the setting SoUn with the UP and DOWN buttons.
• Push the ENTER button.
The effect light is controlled via an installed microphone in time with the music in this operating mode.

c) Automatic Mode

• Use the button MENU to select the setting ShNd.
• Push the ENTER button.
• Select the setting CoLo with the UP and DOWN buttons.
• Push the ENTER button.
• Select the setting Auto with the UP and DOWN buttons.
• Push the ENTER button.
• Select the desired speed (SP1-SP8) with the UP and DOWN buttons.
SP1-SP8: Speed slow → fast
• Press the ENTER button to confirm your setting.

d) Pre-Programmed Colour Setting

• Use the button MENU to select the setting ShNd.
• Push the ENTER button.
• Select the setting CoLo with the UP and DOWN buttons.
• Push the ENTER button.
• Select the desired colour (Co1-Co15) with the UP and DOWN buttons.
• Push the ENTER button.

e) Fade Effects

• Use the button MENU to select the setting ShNd.
• Push the ENTER button.
• Select the setting FAdE with the UP and DOWN buttons.
• Push the ENTER button.
• Select the desired fade speed (SP1-SP8) with the UP and DOWN buttons.
SP1-SP8: Speed fast → slow
• Press the ENTER button to confirm your setting.
32