C) Demo Shows; D) Automatic Mode; E) Sound-To-Light Mode; F) Setting Of The Microphone Sensitivity In Sound-To-Light Operation - Renkforce 1488543 Operating Instructions Manual

Led moving head
Table of Contents

Advertisement

Available languages

Available languages

DMX channel
Value
14
000-255
15
000-179
180-189
190-199
200-209
210-255

c) Demo shows

• Use the MENU button to select ShNd in the menu and push the ENTER button.
• Select the desired demo show (Sh 1 - Sh 4) with the UP and DOWN buttons.
• Press the ENTER button to confirm your selection.

d) Automatic mode

• Use the MENU button to select Auto in the menu and push the ENTER button.
• Select the desired operating mode with the UP and DOWN buttons.
oFF
Automatic mode deactivated
on
Automatic mode activated
• Press the ENTER button to confirm your selection.

e) Sound-to-light mode

• Use the MENU button to select SoUn in the menu and push the ENTER button.
• Select the desired operating mode with the UP and DOWN buttons.
oFF
Sound-to-light mode deactivated
on
Sound-to-light mode activated
• Press the ENTER button to confirm your selection.
The device is controlled via the installed microphone in time with the music in this mode.

f) Setting of the microphone sensitivity in Sound-to-light operation

• Use the MENU button to select SenS in the menu and push the ENTER button.
• Select the desired microphone sensitivity with the UP and DOWN buttons.
0
Microphone sensitivity low
100
Microphone sensitivity high
• Press the ENTER button to confirm your selection.
Set the microphone sensitivity so that the light effect changes in time with the music.
34
Function
PAN-TILT-macro speed for channel 13 slow > fast
no function
Automatic mode
no function
Reset
no function

Advertisement

Table of Contents
loading

Table of Contents