Engine Oil Recommendation - TOHATSU MFS 6BZ Owner's Manual

30
PRE-OPERATING PREPARATIONS
1. Full open the air vent screw on the
fuel tank cap and release internal
pressure.
1
1. Air vent screw
2. Fuel tank cap
6
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the fuel
tank cap.
ENOM00037-A

3. Engine oil recommendation

ENOW00022-A
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before star ting engine. ( To
properly fill the engine with oil follow the
instructions, See page 63)
2
ENOF00417-1
SAFE FILL
LEVEL
12 L
NIVEAU
MAXIMUM
ENOF00419-B
CAUTION
Use only high quality 4-stroke engine oil
to insure performance and prolonged
engine life.
The SAE oil viscosity 10W-30 or 10W-40
FC-W outboard motor engine oil is rec-
ommended.
You can also use oils that carry the API
rating of SH, SJ, or SL. Select the appro-
priate viscosity, based on atmospheric
temperature, from the chart below.
10W−40
10W−30
-30 -20 -10 0
-22 -4 14 32 50
ENOW0002A-A
CAUTION
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOF01409-0
10 20 30 40 ˚C
68 86 96 ˚F
ENOF00208-0