System Components - TA Instruments DHR Series Getting Started Manual

System Components

The SPC consists of four components:
• The jacket, which is mounted on the instrument base
• The cup, which is removable and inserts into the jacket
• The cap, which screws onto the jacket to hold the cup in place
• The impeller, which attaches to the instrument spindle
These are shown in the figures below.
Figure 1 SPC properly mounted on DHR Rheometer.
Figure 2 The cup (left), cap (center), and impeller (right).
DHR/AR Series Starch Pasting Cell Getting Started Guide
Impeller
Cap
SPC jacket
Page 9