Table of Contents
Advertisement
FAN OR HEATING ELEMENT SWITCH REPLACEMENT
- Disconnect all power to the Oven. Before beginning, disconnect power at the
breaker or power disconnect.
CAUTION! SHOCK HAZARD: DO NOT rely on shutting off Control Heating Element
Switches or Emergency Stop! Disconnect all power to the Oven. Before begin-
ning, disconnect power at the breaker or power disconnect
- Loosen the screws retaining the cover of the Control Box and slide it up and off
by the Keyhole Slots (FIG 8).
- Loosen and remove the terminal connections on the Fan or Heating Element
Switch.
- Unthread the flat retaining nut from the outside surface of the cover and remove
the Fan or Heating Element Switch from the Control Box Cover (FIG 10).
- Replace the Fan or Heating Element Switch.
- Reconnect the terminal connections.
- Replace the Cover.
- Reconnect Oven power and test Fan or Heating Element Switch.
TEMPERATURE CONTROLLER REPLACEMENT
- Disconnect all power to the Oven. Before beginning, disconnect power at the
breaker or power disconnect.
CAUTION! SHOCK HAZARD: DO NOT rely on shutting off Control Heating Element
Switches or Emergency Stop! Disconnect all power to the Oven. Before begin-
ning, disconnect power at the breaker or power disconnect.
- Loosen the screws retaining the cover of the Control Box and slide it up and off
by the Keyhole Slots (Fig 8).
- Loosen and remove the terminal connections on the Temperature Controller (FIG
11).
- With a flat blade screwdriver, unlatch retainer and remove the Temperature
Controller (FIG 12) from the Control Box Cover by pushing it through the front.
- Replace the Temperature Controller.
- Reconnect the terminal connections.
- Replace the Cover.
- Reconnect Oven power and test Temperature Controller.
DOOR GASKET REPLACEMENT
- Oven must be off and fully cooled before beginning.
- Using a pencil, mark the cabinet frame at the edge of the Gasket. Also mark
screw locations before removing (FIG 13).
- Loosen and remove the Phillips head screws attaching the Gasket to the Cabinet.
- Pull damaged gasket away.
- Set replacement Gasket against cabinet frame referring to the previous pencil
marks.
- Using previously removed screws and referencing pencil marks, install the
replacement Gasket.
8
FIG. 10
FIG. 11
FIG. 12
FIG. 13
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Advertisement
Table of Contents
