Table of Contents
Advertisement
• This Oven must be located only on a flat, level and secure surface. Do not locate the Oven on an elevated platform, table, bench, roof or
other non-secure location
• DO NOT attempt to stand or sit on the Oven Cabinet. It may cause collapse resulting in serious injury.
• The Oven generates high internal heat during operation. All interior walls and door surfaces will reach 400 F [204 C] during operation.
Use extreme caution when Oven is open to avoid burns.
• Always wear appropriate heat-resistant work gloves and protective clothing while placing items in or removing items from Oven.
• Allow sufficient time for cooling before touching parts.
• DO NOT use the Oven as a storage area. Items placed inside may be forgotten and cause a fire if Oven is started.
• DO NOT store items on top of the Oven cabinet.
• To provide proper ventilation for cooling and prevent overheating, the Oven must be placed at a minimum of 3' (31 cm) from the nearest
wall, in a well–ventilated area. DO NOT allow the ventilation fan intake to be blocked or possible permanent damage could occur.
OVEN SITE LOCATION
FIRE HAZARD!
Install ONLY on a solid, level, bare and clean concrete floor surface. DO NOT install over painted or coated concrete, tile, vinyl,
asphalt wood or any other material that will be melted or ignited by exposure to high temperatures transmitted through the floor.
EXPLOSION HAZARD!
The oven must be installed in an area that is free from flammable and explosive dust, fumes and gasses.
The Hot Coat M446 Powdercoating Oven generates heat during operation. Sufficient space must be provided around the unit for
exterior cabinet cooling and ventilation air circulation.
• Select an area with adequate ventilation and air circulation. A minimum of 3' [90 cm] of free space must be maintained around all sides and above the
Oven. This is to allow for adequate ventilation and to allow room for a person to access all sides for maintenance purposes. Do not store objects behind or
along the Oven.
• The temperature environment for proper operation must be between 32°F and 120°F [0°C and 49°C]. The Oven may not function properly in excessive
ambient temperature conditions.
• Keep all lines, cords, and hoses out of the path between the powder application station and the Oven door to avoid a potential tripping hazard or where
damage could occur.
To order parts and supplies: 800.343.9353 >> eastwood.com
INJURY HAZARD!
BURN HAZARD
FIRE HAZARD!
3
Advertisement
Table of Contents
