Dhcp Server Settings - Buffalo AirStation WLMR-L11G Install Manual

1.1 airstation versatile access point
Table of Contents

Advertisement

Figure 4.5
DHCP Server
Settings
10
4.4.8 Keep Alive
Enables the PPPoE client to send a Link
Control Protocol (LCP) echo request to the
PPPoE server once per minute. If there is no
reply within six minutes, the client discon-
nects. Set to Disable if frequent disconnec-
tion occurs.
4.4.9 Set
Click Set.
4.5 DHCP Server (Settings)
4.5.1 DHCP Server function
Select Use to enable or Don't Use to
disable the LAN DHCP Server function in the
AirStation.
4.5.2 Assign Address
Allows administrator to specify the starting IP
address and range of addresses (nodes) for
DHCP Server function. Allows selected
addresses to be excluded.
4.5.3 Lease Duration
Specifies the number of hours (1-999) an
assigned IP address is valid. The client PC will
request a renewal of IP address at the end of
the valid time period.
4.5.4 Default Gateway address
Allows administrator to use the Default
Gateway address (the AirStation's IP address),
assign a specific Gateway address, or block
clients from notice of a Gateway.
4.5.5 Notice of DNS (Name) Server Address
Allows administrator to use the default DNS
address (the AirStation's IP address), assign a
specific DNS address, or block clients from
notice of a DNS address.
4.5.6 Notice of Domain Name
Domain name will be sent to LAN PCs when
an IP address is assigned. Enter a maximum of
64 alphanumerical characters. Click Set.
4.5.7 Manual Assignment
Allows a PC to receive a specific IP address
when a specific MAC address is detected.
• Enter the IP address to be assigned to a
specific MAC address.
• Enter the matching MAC address for the IP
address. Click Add.
4.6 NAT (Network Address Translation
Settings)
4.6.1 Address Translation
Select Use or Don't Use. Address Transla-
tion must be enabled for client PCs to connect
to the Internet. Selecting Use enables the
following functions:
• IP Masquerade-When the LAN PC
connects to the WAN side, the IP address of
LAN PC is dynamically translated to
become the WAN IP address of the
AirStation. Multiple LAN PCs can share one
WAN IP address to access the Internet.
• Static IP address translation-When the
WAN requests connection to the LAN, the
WAN IP address of the AirStation is
translated into the IP address of the LAN
PC.
Click Set.

Advertisement

Table of Contents
loading

Table of Contents