Table of Contents
Advertisement
Figure 4.2
Time Setup
Figure 4.3
Management
Settings
8
4.1.6 DNS Server
Input the DNS address(es) of the server to
be used by the WLMR-L11G for DNS
resolution. If DNS is not used, leave blank. If
"Auto IP assignment from DHCP Server" is
selected in section 4.1.4.1, DNS addresses will
be assigned automatically, provided the DHCP
server is set to provide them.
4.1.7 IP address of LAN
Allows administrator to specify a static IP and
Subnet Mask for the LAN side of the
AirStation.
4.1.8 DHCP Server function
Allows administrator to enable/disable the
DHCP server function for the AirStation LAN
side. Select Use to enable and Not Used
to disable the function.
4.1.9 Assign address
Sets the beginning address and range of
addresses to be assigned by the AirStation's
DHCP server function. Select up to 253
consecutive addresses (nodes).
4.1.10 Click Set
Click Set to save the settings to the
AirStation.
4.2 Time
Set the time to synchronize the log outputs
to the correct time.
4.2.1 NTP
Check the NTP (Network Time Proto-
col) box to use an external time source. If
checked, specify the address of the time
server, update interval, and time zone of
AirStation. If NTP is used, manual set up of
time is disabled. Click Set.
4.2.2 Current Time
Leave the NTP box unchecked. Enter the
current time. Click Set.
4.3 Management (Management
Settings)
4.3.1 Password
Allows the administrator to enter an
administrator password to restrict access to
the setting screens.
• Current Password-Enter current password
when changing the password. If setting a
password for the first time, leave blank.
• New Password-Enter new password. Use
up to eight alphanumeric characters and
the underscore (_) symbol for the
password.
Advertisement
Table of Contents
