Table of Contents
Advertisement
Figure 4.8
Packet
Filtering
Figure 4.9
URL Filtering
12
Gateway=Address through which the
packet passes before it reaches the
destination address.
Metric=Number of routers (1-15) to be
passed before the packet reaches its
destination.
• Click Add.
4.7.3 Routing Table Entries (Display/Delete)
Allows administrator to delete Routing tables.
4.8 Packet Filter (Packet Filter
Settings)
Configures packet restrictions.
4.8.1 Setup for filtering
• Action-If administrator selects Packet
from LAN is Deny or Reject, the
administrator will no longer have access to
the AirStation configuration screens.
This function prohibits setup from a wireless
PC. The WLMR-L11G can be returned to the
factory default settings (ALL of them!) by
holding down the INIT button on the back of
the unit for three seconds.
Filtering is controlled by the following
parameters:
- Destination IP Address
- Source IP Address
- Protocol (all protocols, ICMP, arbitrary
protocol number, TCP/UDP protocol
number)
- Destination port number
- Log of filtering Click Add the rule.
4.9 URL Filter
Allows administrator to configure URL filter
settings. Enter key words for the AirStation to
block from Internet access.
4.10 Security/MAC Restrict
Select "Security", then "MAC Restrict" from
the menu on the left.
Note: If configuring from a wireless PC,
add your MAC address to the list of autho-
rized wireless LAN PCs.
4.10.1 MAC Restrict Settings
Add MAC addresses to the authorized list
manually. If RADIUS is enabled, the client
must first be authenticated. Enter the MAC
address in the "MAC address of wireless LAN
PC" field and click Add. The MAC address
must be in two-digit groups separated by
colons.
Example: 00:40:26:00:11:22
Advertisement
Table of Contents
