Table of Contents
Advertisement
• Confirm Password-Reenter the new
password for confirmation.
Click Set.
4.3.2 Setting Interface
Limits the interfaces allowed for AirStation
setup. Web (browser) and Telnet settings are
options.
4.3.3 UPnP Settings
Select Use to enable UPnP (Universal Plug
and Play) support. When a computer with
UPnP support connects to the AirStation, the
computer obtains configuration information
from the AirStation. Click Set.
4.3.4 Logging Settings
• Send Syslog Server-Select Use and enter
the address of the Syslog server. Syslog
reports will be sent to this server. Refer to
the Syslog server's documentation for
exact settings.
• Kind-Select the types of reports to be sent
to the Syslog server.
Click Set.
4.4 PPPoE
4.4.1 Connection User Name
Enter user name (up to 64 alphanumeric
characters) for PPPoE authorization.
4.4.2 Connection Password
Enter ISP provided password (up to 64
alphanumeric characters). Reenter password
in Confirm box.
4.4.3 Service Name
Enter PPPoE service name (up to 64
alphanumeric characters). If ISP doesn't
require service name, leave blank.
4.4.4 Connection Type
Select from:
• Continuous Connection-Connects
immediately after setting and never
disconnects.
• Connect on Demand-Reconnects when
the Disconnect time elapses.
• Manual-Disables Automatic Connection.
Connect to Internet using Connect
button on initial settings page. Connect
button will not appear until PPPoE is set.
4.4.5 Disconnect Time
Specify number of minutes (0-1440) before
automatic disconnect is performed. If zero is
entered, disconnect function is disabled. If
Continuous Connection is selected, timer is
disabled.
4.4.6 No Key
Authorization Method for accessing the ISP
PPPoE server. If unknown, select Auto
authorization.
4.4.7 MRU (Maximum Receive Unit)
Maximum Receive Unit (578-1492) when
using PPPoE.
Figure 4.4
PPPoE
Configuration
9
Advertisement
Table of Contents
