Advertisement
The EASTWOOD CUT-N-WELD WELDING TOP AND PLASMA CUTTING TOPS are available separately and designed to fit the Eastwood 750 lb. Work Stand
(#43120) and others with up to a 1.25" [32mm] tube diameter. The Welding Top is constructed of heavy 14 gauge steel for superior warp-resistance and has
generous 1.00" wide clamping slots for maximum welding versatility. The Plasma Cutting Top consists of a rugged steel frame with (10) 22" x 1.25" 12 gauge
steel, replaceable Cutting Slats (#21275).
CONTENTS
#21273 Includes:
(1) Welding Top
OR
#21274 Includes:
(1) Plasma Cutting Top
SPECIFICATIONS
#21273 Welding Top:
#21274 Plasma Cutting Top: • 23.20" [588.5mm] x 22.05" [560mm]
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
READ INSTRUCTIONS
• Thoroughly read and understand this manual before using.
• Save for future reference.
• Keep fingers and hands away from moving parts when operating.
• Exercise caution when using Plasma Cutting Table Top to keep the cutting area centered over the Cutting Slats. Failure to do so could
result in damage to the Table Top or Folding Stand structure causing an unsafe condition due to reduced load capacity.
• Inspect Table Tops and Stand before each use for loose, broken, or damaged components. Do not use tables if any components are
damaged or not properly adjusted.
• Handling sharp metal can cause serious cuts. Wear thick, well fitting work gloves to prevent cuts from handling sharp metal.
• Handling sharp metal can cause serious cuts. Wear thick, well fitting work gloves to prevent cuts from handling sharp metal.
2
(2) M6 x 12mm Round Head Screws
(2) M6 x 12mm Countersunk Screws
(4) M6 x 12mm Round Head Screws
• 29" [738mm] x 19.10" [485mm] Working Surface
PINCH & CRUSH HAZARD!
INJURY HAZARD!
CUT HAZARD!
INJURY HAZARD!
(2) 1.25" [32mm] x 0.4" [1.0mm] Spacers
(2) 1.25" [32mm] x 0.4" [1.0mm] Spacers
• 14 gauge
• Weight Limit: 250lbs.
• 12 gauge
• Weight Limit: 100lbs.
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
Advertisement
