Download Print this page

Daintree GE current Lumination LRX Series Installation Manual page 6

Led luminaire

Advertisement

Lumination
(LRX - Series)
®
Load springs into upright position by twisting the springs
9
upward and carefully insert the fixture to the hole of the
frame. Ensure fixture is secure.
• All kit and frame will be completely addressed on ceiling.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-005 (A)/NMB-005(A)
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Springs up
www.gecurrent.com
© 2021 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information provided is subject to change without
notice. All values are design or typical values when measured under laboratory conditions.
IND343 (Rev 04/02/21)
Installation Guide

Advertisement

loading

This manual is also suitable for:

Ge current lumination lrxembbkit07heGe current lumination lrxembbkit07Ge current lumination lrxembbkit10