Advertisement
Lumination
(LRX - Series)
®
• Fixture may fall down if not installed properly, follow
installation instructions.
• Wear safety glasses and proper aid during installation and
maintenance.
• Use only UL certified copper wire, wire connectors,
minimum 18AWG, minimum rated 75°C.
Save These Instructions
Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
NOTE: LRXEMBBKIT07HE, LRXEMBBKIT07 and LRXEMBBKIT10 are suitable for wet locations and are intended for covered ceiling installation only. The retrofit kit is accepted as a component of a luminaire
where the suitability of the combination shall be determined by UL or authorities having jurisdiction.
Wear work gloves to prevent dirt and oil from being transferred to the luminaire.
Kit vs Fixture
LRXR EMBB Fixture
SAP Description
LRXR410ABBCCEL
LRXR610ABBCCEL
LRXR618ABBCCEL
LRXR618ABBCCEL
LRXR810ABBCCEL
LRXR818ABBCCEL
LRXR830ABBCCEL
LRXR840ABBCCEL
Nomenclature for LRX Series:
I - "A" Denotes color rendering index (CRI)
8 - 80
9 - 90
II - "BB" Denotes correlated color temperature (CCT)
27 - 2700K
30 - 3000K
35 - 3500K
40 - 4000K
50 - 5000K
• LRXEMBBKIT07HE shall be mounted Max. 20.11 ft ( 6.12 m)
• LRXEMBBKIT07 shall be mounted Max. 22.71ft (6.92m)
• LRXEMBBKIT10 shall be mounted Max. 25.99ft (7.92m)
Thickness of ceiling is listed below:
LRXREL Fixture
SAP Description
LRXR410ABBCCEL
LRXR610ABBCCEL
LRXR618ABBCCEL
LRXR618ABBCCEL
LRXR810ABBCCEL
LRXR818ABBCCEL
LRXR830ABBCCEL
LRXR840ABBCCEL
CAUTION / ATTENTION
• Porter des lunettes de sécurité et utiliser des outils adéquats durant l'installation
et la maintenance.
• Utiliser seulement du câblage de cuivre classé 75°C et approuvé par UL pour les
connections d'entrées et de sorties.
• Utiliser des conducteurs de grosseur 18AWG minimum ou de grosseur 14AWG
dans le cas de montage en rangée continue.
LRXR EMBB Frame Kit
SAP Description
LRXEMBBKIT07HE
FRAME6REL07
FRAME6REL10
FRAME6REL10
FRAME8REL07
FRAME8REL10
FRAME8REL10
Thickness of Ceiling
Max.(mm)
15
20
LRXS EMBB Fixture
SAP Description
LRXS410ABBCCEL
LRXS610ABBCCEL
LRXS618ABBCCEL
LRXS618ABBCCEL
LRXS810ABBCCEL
LRXS818ABBCCEL
LRXS830ABBCCEL
LRXS840ABBCCEL
III - "CC" Denotes dimming type
MD - 0-10V Dimming
PH - Phase cut Dimming
LRXSEL Fixture
SAP Description
LRXS410ABBCCEL
LRXS610ABBCCEL
LRXS618ABBCCEL
LRXS618ABBCCEL
LRXS810ABBCCEL
LRXS818ABBCCEL
LRXS830ABBCCEL
LRXS840ABBCCEL
2
Installation Guide
LRXS EMBB Frame Kit
SAP Description
LRXEMBBKIT07HE
FRAME6SEL07
FRAME6SEL10
FRAME6SEL10
FRAME8SEL07
FRAME8SEL10
FRAME8SEL10
Thickness of Ceiling
Max.(mm)
15
20
Advertisement
