Dimensions; Electrical Connection / Commissioning - Helios WHS HE Installation And Operating Instructions Manual

Installation and Operating Instructions
ATTENTION
Temperature Control System WHS HE
2�5

Dimensions

100
G 1
G 1
2�6

Electrical connection / commissioning

The safety instructions in chapter 1�2 must be observed!
– The electrical connection and commissioning are to be carried out in accordance with the relevant wiring diagram
and are only to be carried out by a certified electrician.
– All relevant standards, safety regulations (e.g. DIN VDE 0100), as well as the technical connection
conditions of energy suppliers are to be adhered to!
– Network configuration, voltage and frequency must be consistent with the rating plate information.
– Protective conductor, including additional potential equalisation connections must be properly installed!
– Check designated use of the assembly
– Compare mains voltage to rating plate data
– Check all parts for tightness, particularly fittings, water connections and pipes.
– Compare power consumption to rating plate data
G 1
G 1
9
WHS HE
WHSH HE 24V
G1 G1
100
190
230
EN
Fig� 10
55