Time; Date - flowair T-box User Manual

Time

Time
13PM
Setting of time

Date

Date
August
Setting of date
www.flowair.com
Calendar
• For each day you can set up to 20 on/off events,
• Start time of new event is also the end time of previous event,
• For each event you can set any temperature for units, in the
range of 5 – 45 C, For each event you can set for KM an
o
air flow and dampers
• opening degree, for OXeN an air flow,
• Events for each day can be set individually or they can be
copied from day, which was already set.
Activation of calendar is signalized on main screen via
following icons:
calendar active – SYSTEM ON
calendar active – SYSTEM OFF
calendar active – settings forced.
There were ad hoc set other parameters than
the settings programmed in the calendar:
• desired temperature,
• air flow for OXeN,
• the capacity or degree of opening of the KM
and Cube dampers
• system were OFF and was turned on (to turn
on the system press and hold for 2 s the
calendar icon on main screen),
• system were ON and was turned off (to turn
off the system press and hold for 2 s the
calendar icon on main screen).
Ad hoc settings stays as long as time of current
event in calendar. With start of next event,
units will operate according to programmed
settings.
71