Advertisement
(4) Start binding (This step is only required when first binding or replacing
the transmitter, you need to do it manually.)
1. Go to APP - Setting - Controller, transmitter connection method:
2. Long press the aircraft bind button to enter the binding mode.
3. Select "Set transmitter and aircraft connection" and scan aircraft.
4. Select the aircraft and connect.
You have to complete the binding process on APP, only when first time using
the drone or if replacing the new transmitter.
Tips:
-The binding process has been completed in the factory. Generally, user only
need to do the first 3 steps.
-After entering binding mode, the Image Indicator(yellow) flash rapidly and
become solid (yellow) after binding is successful.
-Please keep the remote controller at least 1 meter away from drone during
binding process.
Tr a n s m i t t e r m o d e l
C o n t ro l l e r
S e t t r a n s m i t t e r a n d a i rc r a f t c o n n e c t i o n
J o y s t i c k s e t t i n g
C u s t o m b u t t o n F n
H U B S A N _ Z I N O M I N I S E _ X X X X
C o n t ro l l e r
T i p s :
1 . Long press the bind button to enter Bind Mode;
2 . C l i c k " Re f re s h " to re f re s h t h e a i rc r a f t l i s t ,
please make sure the your mobile device and
transmitter is connected before refreshing;
3 . S e l e c t t h e a i rc r a f t a n d c o n n e c t .
SyncLeas2
N o f u n c t i o n
S c a n a i rc r a f t
14
SyncLeas2
Refresh
Connect
Advertisement
